Filter
Top Products
DeviceNet to Motor Drives
36
Use Input Word xx
If you want to map this word of Input data to a motor drive parameter, select this option. If this option is
not selected, the data in this Input word will be set to 0.
Motor Drive Address
This is the Address of the Motor Drive mapped to this word of Input data. The Motor Drive Address
must be in the range 0 to 255.
Parameter Number
This is the Parameter Number of the Motor Drive mapped to this word of Input data. The DN-3000 will
read the value of the motor drive parameter specified by the Motor Drive Address and Parameter Number
and place that value in this word of the Input data.