Filter
Top Products
42
Q How do I remove a file from the hotsync bin?
A To remove file from hotsync bin: run the Palm Desktop Install Tool
(Start\Programs\Palm Desktop\Install Tool)
then select user then select offending file and click Remove...
Q When I press the Presenter-to-Go icon in PowerPoint, will it automatically
pick up the names of each slide, the presenter notes and the text content
for each slide?
A Yes
Q I used the Presenter-to-Go printer driver to make a slide, but the slide was
compressed in the horizontal direction.
A You must change the printer driver to “Landscape” mode before printing. On some
programs this must be done in the “Page Setup” and printer driver. You should be
able to get slides that are the same aspect ratio as the original if you
make these adjustments.
Q Can I see what my presentation looks like before I HotSync it into the
handheld?
A Yes, use the “View” button to review your presentation prior to pressing the
“Queue” button for HotSync.
Q Can Presentations be saved on a memory card?
A Yes, you may select a memory card as the destination for a mobile presentation
when you HotSync. When you open the Presenter-to-Go Palm application and click
on the Presentation Name, the Presentation List includes presentations on both the
handheld and a memory card. Presentations that are on the memory card will have
a bullet in front of them. If you select a presentation that is on the memory card,
when this file opens, a local copy of the file is temporarily created on the handheld.
When you look at the Presentation List again, this presentation will now have a
dash next to it. If you remove the memory card and plug in the Presenter-to-Go
Card you will still be able to use this presentation from the memory card.
Q How fast does Presenter-to-Go drain the handheld’s batteries?
A Presenter-to-Go uses its own power supply, so the card itself does not drain the
Palm’s batteries. On handhelds with a full charge, you can present for about 3
hours. If you don’t use the Presenter-to-Go power supply, the handheld’s battery
will drain in about 80 minutes.
Q The picture on my monitor/projector display is incorrect or it flickers.
A The display resolution or refresh rate is incorrectly determined. Re-start the
Presenter-to-Go application, for the display to automatically detect 1024.x 768 at
75 Hz or manually adjust the display to that resolution.
Q Auto-shut-off does not work when the Presenter-to-Go application in
running.
A This is intended, and done so that a presentation does not stop in the middle, or
while in automatic loop mode.