Filter
Top Products
13
C H A P T E R 3Cable the module
Stack Mode
Cabling to a Matrix Module in a group of switches
The 1000SX Advanced Module is installed in a different switch from
the Matrix Module, so the cabling process is in two parts; the switch
containing the 1000SX Advanced Module must be connected to the
group, then the high-speed link between this group and another group or
device is established.
1 Plug the Stacking Cable (Intel Order Code: ES500SC) into the
Stack Interface Module connector on the 1000SX Advanced
Module, and secure it using the latches on the connector.
2 Plug the other end of the Stacking Cable into the Matrix Module,
and secure it using the latches on the connector.
3 Plug a second Stacking Cable into the 1000Base-SX SIM connec-
tor on the 1000SX Advanced Module, and secure it using the
latches on the connector.
4 Plug the other end of the Stacking Cable into the Matrix Module,
and secure it using the latches on the connector.
1000Base-SX
Stack Interface Module
CLASS 1 LASER PRODUCT
1000SX Advanced Module for 500 Series Switches
5006
1000Base-SX
Stack Interface Module
CLASS 1 LASER PRODUCT
1000SX Advanced Module for 500 Series Switches
5008
A23295.book Page 13 Wednesday, August 30, 2000 1:16 PM