Filter
Top Products
C H A P T E R 4Configure the module
24
Mapping the VLANs
New VLANs should be mapped when they are created. Creating new
VLANs is described in the user guide for the switch. The following in-
structions enable you to map existing VLANs using Intel Device View.
1 Select VLAN/Routing Setup (for 550 switches) or VLAN
Setup (for 510 and 520 switches).
Any VLANs detected and their mapped status are displayed.
2 Click 802.1Q Map....
A23295.book Page 24 Wednesday, August 30, 2000 1:16 PM