Filter
Top Products
C H A P T E R 3Cable the module
18
4 Repeat steps 1 and 2 for the second 1000SX Advanced Module.
Plug the other end of the Stacking Cable into port 2 on the Matrix
Module.
5 Plug the SC connectors on the fiber optic cables into the RX and
TX sockets, and connect the other end of the cables to a device or
group of switches.
6 Check the LEDs on the 1000SX Advanced Modules to verify the
links. For more information on LEDs, see Chapter 2.
1000SX Advanced Module for 500 Series Switches
1000Base-SX
Stack Interface Module
CLASS 1 LASER PRODUCT
1000SX Advanced Module for 500 Series Switches
1000Base-SX
Stack Interface Module
CLASS 1 LASER PRODUCT
Matrix Module for 500 Series Switches
4
1
5
2
6
3
Module
Status
Link
Status
Internal Port
Server
5050
A23295.book Page 18 Wednesday, August 30, 2000 1:16 PM