Filter
Top Products
C H A P T E R 4Configure the module
22
To combine 1000Base SX port bandwidth using Intel Device View
You must select the module connected to Port 3 on the Matrix Module
as the anchor port in order for the combined port bandwidth to be suc-
cesful.
Note If you are not sure which port is connected to Port 3 on the
Matrix Module, use the Color Code Matrix Ports
option in the Tools menu.
1 Check the diagnostics in Intel Device View to ensure that no
cabling errors are registered. If errors are shown, retrace the
cables using the instructions in Chapter 3.
2 Right-click the stack border and select Stack Setup> Link
Aggregation.
A23295.book Page 22 Wednesday, August 30, 2000 1:16 PM