Filter
Top Products
1-1
1
CHAPTER 1
ABOUT THIS MANUAL
This manual describes how to set up and use the Intel 186 EB/EC Evaluation Board. The board
is used to evaluate hardware and software performance and provide an “emulation-like” feel
when executing and debugging user-written code. This board operates at either 3.3 volts or 5.0
volts. It supports the following processors:
• 80C186EB/80C188EB
• 80L186EB/80L188EB
• 80C186EC/80C188EC
• 80L186EC/80L188EC.
The 3.3 V, 16 MHz 80L186EB or 80L186EC processor is installed on the evaluation board. This
manual covers both processors.
1.1 CONTENT OVERVIEW
Chapter 1, About This Manual — This chapter contains an overview of this manual.
Chapter 2, Getting Started — This chapter describes the Intel 186 EC/EB Evaluation Board, and
provides setup instructions.
Chapter 3, Hardware Overview — This chapter describes the evaluation board hardware, such
as connectors, jumpers, memory configuration, and power supply.
Chapter 4, Introduction to the Software — This chapter provides an overview of the software
used on the evaluation board and the host computer.
Chapter 5, iECM-86 Commands — This chapter describes the iECM-86 software, which runs
on the host computer.
Chapter 6, iRISM-186 Commands — This chapter describes the iRISM-186 software, which
runs on the evaluation board.
Appendix A, Parts List — This chapter contains a part list for both the EB and EC versions of
the evaluation board.