Filter
Top Products
CPB4612 Configuration and Maintenance Guide
x
Document Organization
This document describes the operation and use of the CPB-4612 Computer Processor Board with an Intel®
Pentium® M. The following topics are covered in this document.
Chapter 1, "Introduction," introduces the key features of the CPB-4612. This chapter includes a product
definition, a list of product features, and a functional block diagram with a brief description of each block. This
chapter can be used to compare the features of the CPB-4612 against the needs of a specific application.
Chapter 2, "Getting Started," provides unpacking instructions and initial setup information for the CPB-4612.
This chapter summarizes configuration information and should be read before using the board.
Chapter 3, "Configuration," describes the jumper settings on the CPB-4612. This chapter details factory
default settings and provides information about tailoring the board to the needs of specific applications.
Chapter 4, "Reset," discusses the reset types and reset sources available on the CPB-4612.
Chapter 5, "System Monitoring and Control," lists various system monitoring and control features available
on the CPB-4612.
Chapter 6, "IDE Controller," provides an introduction to the CPB-4612's IDE Controller. This chapter covers
drive configuration, IDE I/O mapping, device drivers, and the CPB-4612's support for internal and external
disk drives.
Chapter 7, "Watchdog Timer," explains the operation of the CPB-4612's watchdog timer. Sample code is
provided to illustrate how the watchdog's functions are used in an application.
Chapter 8, "System BIOS," discusses recovery from and correction of a corrupted BIOS.
Appendix A, "Specifications," contains the electrical, environmental, and mechanical specifications for the
CPB-4612.
Appendix B, “Connectors,” This chapter provides a connector location illustration and connector pin out
tables. A detailed description and pin out for each connector is given.
Appendix C, "Thermal Considerations," describes the thermal requirements for reliable operation of the
CPB-4612.
Appendix D, "Datasheet Reference," provides links to Websites with information about many of the devices
and technologies used in the CPB-4612.
Appendix E, "Agency Approvals," presents UL, CE, and FCC agency approval and certification information
for the CPB-4612.
Appendix F, "CRT Specifications,” identified features of the CRT4612 Rear Transition Module (RTM).