Filter
Top Products
56
Reserved Memory Address: This item specifies the location of the Reserved Memory if not disabled.
PNP Options Descriptions
Plug & Play O/S: If disabled (default), the BIOS will set up any plug & play devices. If
enabled, the operating system is assumed to configure plug & play
devices.
Reset Configuration Data: If set to “Yes”, the plug & play configuration is reset after leaving SETUP.
This option is automatically reset to “No”.
ACPI / Power Settings
ACPI 2.0 Support: This item Enables or Disables ACPI 2.0 Features, which primarily involve
advanced power management capabilities.
ACPI APIC Support: This item Enables or Disables inclusion of the ACPI APIC table.
Headless Mode: This item allows the system to operate in Headless Mode through ACPI.