Intel ECB-865 Computer Hardware User Manual


 
ECB-865
ECB-865 User’s Manual 15
3.7.2 Intel 82559(or REALTEK RTL8139C) & 82801BA(ICH2) + 82562ET (PHY)
Network Controller
The 82559 (or RTL8139C) and ICH2+PHY is fully integrated 10BASE-T/100BASE-TX
LAN solution. The 32-bit PCI controller provides enhanced scatter-gather bus mastering
capabilities and enables the 8139C to perform high-speed data transfers over the PCI bus.
Its bus master capabilities enable the component to process high level commands and
perform multiple operations, which lower CPU utilization by off-loading communication
tasks from the CPU.
The ECB-865 equips two LED indicators on the RJ-45 connector to indicate the LAN
interface status. These messages will provide you a guide for troubleshooting.
Green LED LAN Activity LED that indicates the data transfer activity.
Blinking: indicates transmission/receiving activity
On: indicates no activity but link is valid
Off: link is invalid
Yellow LED LAN Link Integrity LED that indicates link speed
On: link speed at 100Mbps
Off: link speed at 10Mbps
3.7.3 Drivers Support
ECB-865 provides on CD-Title to support on-board VGA and Ethernet device drivers in
various operating systems. Before installing the device drivers, please see the reference
files in each sub-directory. You cannot install drivers from CD-Title directly.
815E CHIPSET INTEGRATED GRAPHY: Support NT4.0, Windows9x, Win2000, …
environment
INTEL 815E & ICH2 CHIPSET DRIVER: Support NT4.0, Windows9x, Win2000, …
environment
Intel 82559 (or REALTEK 8139C): Support Dos, Windows3.1, Windows9x, NT3.5,
NT4.0, Novell, OS/2 …