Filter
Top Products
User’s Manual
66 ECB-865 User’s Manual
4.3.6.4.2 Parallel Port IRQ
This option is only valid if the Onboard Parallel Port option is not set to Disabled. This
option sets the IRQ used by the parallel port.
4.3.6.4.3 Parallel Port DMA Channel
This option is only available if On Board Parallel Port is set to fixed I/O address and the
setting of Parallel Port Mode is ECP. This option sets the DMA channel used by ECP-
capable parallel port.
4.3.6.5 On-Chip IDE
This option specifies the onboard IDE controller channels that will be used. The settings
are Primary, Secondary, Both, or Disabled