Filter
Top Products
User’s Manual
64 ECB-865 User’s Manual
4.3.6 Peripheral Setup Defaults
This section describes I/O resources assignment for all of on-board peripheral devices.
4.3.6.1 OnBoard FDC
This option enables the floppy drive controller onboard. The settings are Auto, Enabled, or
Disabled.
4.3.6.2 OnBoard Serial Port1
This option enables serial port 1 onboard and specifies the base I/O port address for serial
port 1. The settings are Auto, Disabled, 3F8h, 3E8h, 2E8h, and 2F8h. The Fail-Safe
default setting is Auto.
4.3.6.3 OnBoard Serial Port2
This option enables serial port 2 onboard and specifies the base I/O port address for serial
port 2. The settings are Auto. Disabled, 3F8h, 2F8h, 3E8h, and 2E8h. The default setting
is Auto.