Filter
Top Products
650 System Manual (Draft)
Version 0.4 August 20, 2008
14
Hard Disks
Two 2.5 inch SATA hard drives (HDD) are supported. These drives can be configured as
standard hard drives or as a RAID array. The SATA interface can support data transfer
rates up to 3.0 Gb/s and supports AHCI and Hot Swapping of hard drives.
The HDDs can easily be accessed by removing a panel on the left side of the unit. HDDs
can be installed or removed in seconds by removing one screw. A carrying tray (two of
which are supplied with the 650) clips onto a new drive without tools. The drive can now
easily be slid into the drive bay. In a RAID 1 configuration a drive can be hot swapped,
removed, or inserted with the power on (see section on RAID setup).
HDD access panel HDD slide in-slide out drive bay