Filter
Top Products
650 System Manual (Draft)
Version 0.4 August 20, 2008
58
Refresh Interval
The refresh interval controls how often the hardware monitor values are updated.
This value can be set in the Health Monitor program window. Touch the area of the
screen showing the current value and a touch keypad will pop up to allow you to change
the interval as shown below. The value can also be changed by modifying the registry
key: HKEY_LOCAL_MACHINE\HARDWARE\DESCRIPTION\J2Health\interval.
The value is the number of seconds between updates. The default value is 5 seconds.
Applications
The J2 hardware monitoring software was designed to be used as a simple diagnostic tool
by itself or in conjunction with a much more sophisticated program for local and remote
system monitoring. Please contact J2 if you require additional features or functions not
currently supported.
Support: www.j2retailsystems.com