Filter
Top Products
650 System Manual (Draft)
Version 0.4 August 20, 2008
43
RTC Configuration Screen
Wake On LAN
Wake On LAN has no BIOS setting and is always enabled.
CMOS Clear
The 650 does not have a CMOS clear jumper. The BIOS has been designed so that there
is no setting that can be changed to prevent entry into the CMOS setup. If you suspect
that the CMOS memory may be corrupt, the CMOS memory can be cleared by
disconnecting the CMOS battery for one minute. The CMOS battery is located under the
hard drive bay.
Boot Settings
If more than one bootable device is in the system the boot order can be set in this menu.
If a bootable USB storage device is plugged in at boot up the 650 will boot from that
device by default. If this is not desired the boot order can be changed here. A list of
detected drives will be displayed with the current boot order.
In addition to the internal SATA drives and CF card, the 650 can also boot from a USB
storage device which could be a USB Hard Drive, USB memory stick, USB CD/DVD or
USB Floppy. USB storage devices with 530MB of storage or less boot as drive A;
devices with more the 530MB boot as drive C.