Filter
Top Products
650 System Manual (Draft)
Version 0.4 August 20, 2008
24
Service
Removing the Head from the Base
A countertop base is supplied standard with the unit. The base is easily attached to the
unit by sliding the unit onto the base’s mounting slots. One screw point is used to secure
the base to the unit and is accessed from the bottom of the 650. To remove the base from
the unit, first remove the Base Locking Screw at the bottom of the base as shown in the
picture.
Base Locking Screw
To remove the base, pull it towards the bottom of the unit as shown in the picture. The
unit will slide off its mount hooks. To reattach the base, align the mounting hooks and
locking tab to the plastic slots and push up until secure. Secure the base with the locking
screw.
Slide off towards bottom of unit