Filter
Top Products
650 System Manual (Draft)
Version 0.4 August 20, 2008
34
BIOS Setup
Entering the BIOS Setup
To enter the BIOS Setup, turn on or reboot the 650.
Press the DEL key after the BIOS sign-on screen appears and it has displayed Initializing
USB Controllers… Done. It will display Entering Setup…
The main menu of the BIOS setup will be displayed; this can take a few seconds.
If the supervisor password is set, you must enter it here.
The area on the right side of the screen displays a help window for the current screen or
BIOS option.
Warning: The BIOS setting should only be changed as required. Changing a setting or
loading defaults may stop your system from working if it required a non-default setting.
>For example, in a system set up for RAID if you find you need assistance, please
contact J2 for technical support.
Main, System Overview
In this screen the CMOS time and date can be set. The time and date can also be set
through the OS. This screen also displays the BIOS Build ID, BIOS Build Date,
EC ROM Version, CPU type, CPU speed and DRAM memory size. The memory size
will reflect the amount of system memory available minus the amount used by the
graphics controller.
Main screen