Filter
Top Products
PX875P PRO/ PX875P
12
To Enable Dual-Channel DDR, the following conditions must be met:
M1 & DIMM3 together or DIMM2 & DIMM4 together or all four DIMM
tween DIMM2 & DIMM4.
Same Density (128MB, 256MB, 512MB, etc.)
Same DRAM technology (128Mb, 256Mb, or 512Mb)
Same DRAM bus width (x8 or x16)
Both either single-sided or dual-sided
Same brand
Same timing specifications
Same DDR speed
A => Memory Module Type A, B => Memory Module Type B, X => None.
1.You must use either DIM
slots together.
2.You must use matching DIMM configurations between DIMM1 & DIMM3. You must use
matching DIMM configurations be
z
z
z
z
z
z
z
DIMM1 DIMM2 DIMM3 DIMM4
A A A A
B B B B
A B A B
B A B A
A X A X
B X B X
X A X A
X B X B
RAM Module Installation:
1. Pull the white plastic tabs on each side of the slot away from the slot.
2. Match the notch on the button of the RAM module with the corresponding pattern in the DIMM
slot. This ensures that the module is inserted properly.
3. Lower the RAM module into the DIMM Slot and press firmly using both thumbs until the module
snaps into place.
4. Repeat steps 1, 2 & 3 for the remaining RAM modules.
＊ The pictures above are for reference only.