Filter
Top Products
PX875P PRO/ PX875P
36
Serial ATA Port0/ 1 Mode
This field determines the operating mode of the SATA ports. The options are determined by the
“On-Chip Serial ATA” field.
On-Chip Serial ATA – Combined Mode:
When you set the “On-Chip Serial ATA” to “Combined Mode”, you must select one of the PATA
channels to use with the SATA devices.
Options: Primary Master, Primary Slave, Secondary Master, Secondary Slave
On-Chip Serial ATA – Enhanced Mode:
When you set the “On-Chip Serial ATA” to “Enhanced Mode”, you must determine which of the
SATA devices will be the master SATA device. You configure this with the “Serial ATA Port 0
Mode” field only.
Options: SATA0 master, SATA1 master
Onboard Device
If you highlight the “INTEL OnChip PCI Device” label and then press the enter key, it will take you
to a submenu with the following options:
USB Controller
his option should be enabled if your system has a USB port installed on the system board. You will
eed to disable this feature if you add a higher performance controller.
abled
his option should be enabled if your system has a USB 2.0 device installed on the system board.
if you install a USB 1.1 device.
d
ptions: Auto (default)、Disabled
or disable the LAN Device. Options: Enabled (default)、Disabled
T
n
Options: Enabled (default)、Dis
USB 2.0 Controller
T
You will need to disable this feature
leOptions: Enabled (default)、Disab
USB Keyboard Support
Enables support for USB attached keyboards. Options: Auto (default)、Enabled
AC97 Audio
This item allows you to control the onboard AC’97 audio. O
Onboard LAN Device
This item allows you to enable