Filter
Top Products
PX875P PRO/ PX875P
Chapter 1. Getting Started
Introduction
Congratulations on choosing the PX875P Series mainboard! The PX875P series includes the PX875P
PRO (V2.0) and PX875P (V2.0). These are based on the 82875P Northbridge chipset and the ICH5
Southbridge chipset. It supports Intel
®
Pentium
®
4 Processors with a FSB (Front Side Bus) frequency
of 400/ 533/ 800 MHz.
The PX875P series provides 4 DIMM slots using 184 pin DDR SDRAM with a total capacity of up
to 4GB. You can install “unbuffered/ non-ECC” or “unbuffered/ with ECC” DDR400/ 333/ 266
(PC3200/ 2700/ 2100) SDRAM to the DIMM sockets. The PX875P series support dual channel data
Bus for the DIMM slots.
The PX875P series provide one 8X/ 4X AGP Slot that use 0.8V or 1.5V AGP cards.
The PX875P series include built in IDE facilities that support Ultra ATA 33/66/100 BMIDE and PIO
Modes. These also include built in Serial ATA facilities that supports SATA 150.
The PX875P series come with an AC’97 Sound Codec (ALC655) which supports high quality 6
channels audio (Super 5.1 Channel Audio Effect). It also supports Sony/ Philips Digital Interface
(S/PDIF)
The PX875P series come with eight USB 2.0 ports. These also include an infrared header.
Besides the PX875P PRO V1.0 comes with a LAN Chip (3COM 3C920) which provides a back
panel LAN port capable of 10/ 100 Mbit/s transmission speeds. And the PX875P PRO V2.0 also
comes with a LAN Chip (Marvell MV8001) which provides a back panel LAN port capable of up to
1Gbit/s transmission speeds.
The company’s 3 Year Limited Warranty for this product covers both labor costs and replacement
parts during the 1st year. Only labor costs are covered during the 2nd and 3rd years (replacement
parts will be charged during the 2nd and 3rd years).
All of the information in this manual only for reference. This specification is subject to change
without notice.
1