Intel PX875P Computer Hardware User Manual


 
PX875P PRO/ PX875P
28
MPS Version Control For OS
The 1.1 version is the older version that supports 8 more IRQs in the Windows NT environment.
Choose the new 1.4 version for Windows 2000 and Windows XP. Options: 1.4 (default)1.1
OS Select For DRAM > 64MB
Select “OS2” only if you are running the OS/2 operating system with greater than 64MB of RAM.
Options: Non-OS2 (default)OS2
HDD S.M.A.R.T. Capability
Self Monitoring Analysis and Reporting Technology is a technology that enables a PC to attempt to
predict the possible failure of storage drives. Options: Disabled (default)Enabled
Intel OSB Logo Show
This item allows you to show or hide the small LOGO EPA.
Options: Disabled (default)Enabled
dvanced Chipset Features
RAM Timing Selectable
PD or manual configuration.
SPD”
ption. Options: ManualBy SPD (default)
his item determines CAS Latency. When synchronous DRAM is installed, the number of clock
AM timing. Do not reset this field from the default value
ld is adjustable only when “DRAM Timing Selectable” is
cked when “DRAM Timing Selectable” is set to “By SPD” and is
tomatically determined by the system. Options: 22.53
cally determined by the system.
ptions: 8765
A
D
This item determines DRAM clock/ timing using S
Make sure your memory module has SPD (Serial Presence Data), if you want to select the “By
o
CAS Latency Time
T
cycles of CAS latency depends on the DR
specified by the system engineer. This fie
set to “Manual”. This field is lo
au
Active to Precharge Delay
This item allows you to select DRAM Active to Precharge Delay. This field is locked when “DRAM
Timing Selectable” is set to “By SPD” and is automati
O