Filter
Top Products
Chapter 5 — Setting up the Printer
46 EasyCoder PD41 Printer User’s Guide
Extended Testmode: 7d - Factory Default Function
Step
Data/
Ready
Error RtW Button Comment
7d 1 LEDs flash once per
second.
Lift the printhead, tap the Print button, and lower the printhead.
LEDs will flash.
Tap the button. Printer will start resetting to factory defaults. This is
indicated by scrolling LEDs.
1 LED flashes once per
second, indicating factory
default reset is done.
Press the button > 1 second to perform testfeed. When done, printer
will be ready for use (out of Testfeed mode.)
Extended Testmode: 7e - Exit
Step
Data/
Ready
Error RtW Button Comment
7e1111LEDs flash once per
second.
1 Tap the Print button to exit
Extended Testmode.
The LEDs flash rapidly, and printer is ready for use.