Filter
Top Products
Appendix E — Options
82 EasyCoder PD41 Printer User’s Guide
EasyLAN Ethernet Interface
The EasyLAN Ethernet Interface kit adds network capability to
your printer. See “Interfaces” in Appendix D.
Parallel IEEE 1284 Interface
This kit adds a parallel (“centronics”) port to your printer. See
the “Interfaces” in Appendix D.
Cutter Kit
The Cutter is designed to cut off continuous paper-based stock
or liner between labels. The paper cutter can be controlled using
the instructions CUT, CUT ON and CUT OFF in Fingerprint
(and Direct Protocol).
Internal Rewinder
The Internal Rewinder (and Batch Takeup) kit is an optional
device for peel-off (self-strip) operation, which means that the
labels are separated from the liner (backing paper) after printing
and the liner is wound up on an internal hub. It can also be used
to roll up complete batches of label rolls. The unit also includes a
guide shaft. See Chapter 2, “Loading Media”, for instructions on
how to load the media for peel-off operation.
Printhead Kit
The printer can be fitted with either a 203dpi or 300dpi
printhead. These printheads use different PCBs (printed circuit
board?). The printhead kit is thus available as a replacement kit
(printhead only), or as a complete kit (printhead plus PCB).