Filter
Top Products
Appendix C — Setup Parameters
68 EasyCoder PD41 Printer User’s Guide
XON/XOFF is a protocol in which communication is controlled
by the control characters XON (ASCII 17 dec.) and XOFF
(ASCII 19 dec.) transmitted on the same line as the data. XON/
XOFF can be enabled/disabled separately for data received from
the host by the printer (printer sends XON/XOFF) and for data
transmitted to the host from the printer (host sends XON/
XOFF).
New Line
Selects the character or characters transmitted from the printer to
indicate a new line. There are three options:
• CR/LF ASCII 13 + 10 dec. (default)
• LF ASCII 10 dec.
• CR ASCII 13 dec.
Receive Buffer
The Receive buffer stores the input data before processing. The
size is 8192 bytes and cannot be changed.
Transmit Buffer
The transmit buffer stores the input data before processing.
Default size is 8192 bytes and cannot be changed.
Feed Adjust Setup
The Feedadjust part of the Setup Mode controls how much of
the media is fed out or pulled back before and/or after the actual
printing. These settings are global and will be effected regardless
of which program is run.
Start Adjust
The Start Adjust value is given as a positive or negative number
of dots. Default value is 0, which places the origin a certain
distance back from the forward edge of the copy.
• A positive start adjustment means that the specified length of
media will be fed out before the printing starts. Thus, the
Note: The firmware uses the front edges of labels with
gaps, the ends of detection slots, and the forward
edges of black marks for detection, all seen in relation
to the feed direction.