Filter
Top Products
Appendix C — Setup Parameters
66 EasyCoder PD41 Printer User’s Guide
Setup Description
The printer’s Setup parameters are used to set the printer’s
operational behavior. Chapter 5, “Configuring Settings”,
explains how to set or change the parameters, and this is also
explained in the Fingerprint v10.X.X Programmer’s Reference
Manual, under the
SETUP command.
Serial Communication Setup
The serial communication parameters control the
communication between the printer and the connected computer
or other devices on the standard serial port, referred to as
"uart1:".
For the serial communication channel ("uart1:"), the following
parameters can be set. Make sure they match the setup of the
connected device or vice versa. If the setup of the printer and the
setup of the host do not match, the response from the printer to
host will be garbled.
Baud Rate
The baud rate is the transmission speed in bits per second. There
are 10 options:
•300
•600
•1200
•2400
•4800
• 9600 (default)
• 19200
• 38400
• 57600
• 115200