ioSafe R4 Computer Hardware User Manual


 
P/N: 900-10004-00 REV 02 USER GUIDE, IOSAFE R4
71
ALERTS SETTINGS
This ioSafe R4 device has been pre-configured with mandatory and optional alerts for various
system device warnings and failures. The
Settings
tab allows you to control the settings for the
optional alerts.
It is highly recommended that all alerts are kept enabled; however, you may choose to disable an
alert if you are aware of a problem and wish to temporarily disable it.
At bottom of the tab, under the
Other Alert Settings
heading, you’ll notice a couple additional
options. Selecting the
Power-off NAS when a disk fails or no longer responds
option will
gracefully power off the ioSafe R4 in the event that a disk failure or a disk remove event is detected.
Selecting the
Power-off NAS when disk temperature exceeds safe level
will gracefully power off
the ioSafe R4 when the disk temperature exceeds nominal range.