JVC CU-VD50AA Printer User Manual


 
30
VIDEO SETTING You can only configure settings for video images.
PICTURE QUALITY
For specifying the video image quality.
NORMAL Set to this value under normal circumstances.
CINEMA Plays back in cinema-like picture quality.
FINE Plays back in clear sharply defined picture quality.
SOFT Plays back in soft textured picture quality.
USER SETTING
Plays back images in the picture quality specified in
“DETAIL SETTING”.
DIGITAL NOISE REDUCTION
For specifying whether to enable noise removal from the image.
OFF Disable noise removal.
ON Enable noise removal.
DETAIL SETTING
For specifying the advanced settings when “PICTURE QUALITY” is set to “USER
SETTING”.
CONTRAST For specifying the image contrast level.
BRIGHTNESS For specifying the image brightness level.
SHARPNESS For specifying the image contour.
COLOR For specifying the colour intensity of the image.
GAMMA For specifying the image gray level.
3DNR For specifying the image noise reduction.
PROGRESSIVE OUTPUT
For playing back the source material after converting to an appropriate progressive
video.
AUTO1
Automatically detects the film material and video material
and converts to the appropriate progressive video.
AUTO2
In addition to “AUTO1”, automatically detects the 30fps
progressive video and converts to the appropriate
progressive video.
VIDEO
Converts the video material to the appropriate progressive
video.
Changing the setting may have no effect on some images.
Note
CU-VD50AA.book Page 30 Friday, June 20, 2008 10:07 AM