Filter
Top Products
42
Trouble Action
Playback
The remote control is
not working.
zThe remote control is not operable when the
disc tray is opened. Close the disc tray.
Unable to operate.
zIf the burner does not work at all, remove the
power plug and insert again. (It may not
function properly due to lightning strike or static
electricity.)
No images on the TV.
zConnect this burner to a TV. (P. 12, 13)
zSwitch to the external output that connects the
burner to the TV with a video/audio input
connectors.
zAfter pressing the power button, it will take
about 25 seconds to display the intermediate
screen. (P. 34)
zIf there are too many recorded files or when a
disc that is not recommended is used, it will
take several minutes to display the playback
navigator.
zCheck the resolution setting again. (P. 33)
Images are distorted
during fast-forward/
fast-reverse playback.
z
Images may be distorted for sections where the
playback speed changes. This is not a
malfunction.
The images cannot be
displayed in the
normal aspect ratio.
zWhen both the HDMI terminal and Audio/Video
output connectors are connected, set “HDMI
VIDEO MODE” in the settings menu to “OFF” to
output the images with priority given to the
Audio/Video output connectors. (P. 36)
Reading fails.
zInsert the disc with the label facing up.
zWipe off any dirt that is found on the tray.
zMake sure that the writing surface of the disc is
not damaged.
zDo not use deformed discs.
Playback cannot
function properly.
zPlayback of commercial DVD-Video is not
guaranteed.
Digest Playback
starts when the
PREVIOUS / NEXT
button is pressed
repeatedly.
zAVCHD disc created on a high definition Everio
is equipped with the Digest Playback function. If
the PREVIOUS / NEXT button is pressed
repeatedly during playback, Digest Playback
will start when the normal playback ends.
(P. 24)
CU-VD50AA.book Page 42 Friday, June 20, 2008 10:07 AM