Filter
Top Products
11
ENGLISH
Connecting external speakers
You can connect commercial speakers of the following specifications to the EXT. SPEAKER terminal:
• Impedance: Between 6 Ω and 8 Ω
• Power handling capacity: More than 3 W
Speakers
(commercially available)
Ferrite core (supplied)
To reduce interference from the monitor on external
equipment, attach the supplied ferrite cores near to the
EXT. SPEAKER terminals on the rear panel of the monitor.
CAUTION
• Do not short-circuit 9 and ( speaker cords to each other. (Refer also to the instructions supplied with the speakers.)
NOTE
• When using the external speakers, set “SPEAKER SELECT” on the main menu to “EXT. (external)” (see page 23).
When installing the monitor vertically
• Make sure to install the monitor in the direction illustrated on the right.
• Set the speed of the internal cooling fan to “HIGH” (see “COOLING MODE”
on page 31).
Speakers
(commercially available)
06-42_GM-H40L2A-f.indd 1106-42_GM-H40L2A-f.indd 11 06.4.24 5:20:09 PM06.4.24 5:20:09 PM