Filter
Top Products
16
Daily Operations
Turning on the main power
I : Main power on
‡: Main power off
On the rear panel
Turning on the monitor
From the remote control:
To turn off the monitor, press POWER OFF.
On the main unit:
Each time you press the button, the power
turns on and off.
Selecting an input
From the remote control:
On the main unit:
Each time you press the button,
the input changes.
NOTE
• When “QUICK SWITCH” is set to “INPUT A&B,” you can change
Inputs A and B quickly (see “INPUT CONFIGURATION” on page 23).
Adjusting the volume
From the remote control:
On the main unit:
• When the Control Lock is set to “ON” (see page
29), you cannot use the buttons on the main unit.
• When the Security Lock is in set to “ON” (see
page 32), you need to enter the password when
turning on the monitor.
To turn off the volume immediately:
Pressing the button again resumes
the previous volume level.
•
When using the buttons on the
main unit, set “MUTING” to “ON”
on the main menu (see “AUDIO
SETTING” on page 23).
06-42_GM-H40L2A-f.indd 1606-42_GM-H40L2A-f.indd 16 06.4.24 5:20:22 PM06.4.24 5:20:22 PM