Filter
Top Products
41
ENGLISH
Specifications
General
Model name GM-H40L2A
Screen size Type 40 wide format
Aspect ratio 16:9 (Wide format)
LCD panel 40“ wide, active matrix TFT
Effective screen size (W x H, Diagonally) 885 mm x 498 mm, 1 015 mm
Number of pixels displayed 1 366 (H) x 768 (V)
Number of colors displayed 16.77 million (256 colors for each of RGB)
Viewing angle (TYP.) 170° (Horizontally), 170° (Vertically)
Brightness (TYP.) 400 cd/m
2
Contrast ratio (TYP.) 800:1
Response time less than 20 msec (Tr + Tf)
Weight 27.2 kg
External dimensions (W x H x D) 986 mm x 595 mm x 126 mm
Power requirements AC 120 V/AC 220 – 240 V, 50 Hz/60 Hz
Rated input current 2.4 A (AC 120 V)
1.5 A (AC 220 – 240 V)
Compatible signals See page 12.
Audio power output Internal: 1.7 W + 1.7 W (at impedance 8 Ω)
External: 6 Ω – 8 Ω, 2.2 W + 2.2 W (at impedance 6 Ω)
Speaker Ellipse (40 mm x 70 mm) x 2, impedance 8 Ω
Operating conditions Temperature: 0°C – 40°C
Relative humidity: 20% – 80% (non-condensation)
(Slightly variable depending on ambient conditions for installation.)
Input/output terminals
VIDEO IN A Video input BNC terminal x 1 1 V (p–p), 75 Ω
Y/C terminal x 1 Y: 1 V (p–p), 75 Ω
C (BURST): 0.286 V (p–p), 75 Ω (for NTSC)
0.3 V (p–p), 75 Ω (except for NTSC)
Video output BNC terminal x 1 1 V (p–p), 75 Ω
VIDEO IN B RGB/COMPONENT input D-sub 3-row 15-pin x 1 (RGB is compatible with DDC2B.)
Video signal G, Y: 1 V (p–p), 75 Ω (including sync)
B, R, P
B/CB, PR/CR: 0.7 V (p–p), 75 Ω
Horizontal sync (HD)/Composite sync (Cs) HD: 0.3 V (p–p) to 5 V (p–p), 1 kΩ (positive/negative
polarity)
Cs: 0.3 V (p–p) to 5 V (p–p), 1 kΩ (positive/negative
polarity)
Vertical sync (VD) VD: 1 V (p–p) to 5 V (p–p), 1 kΩ (positive/negative
polarity)
DVI input DVI-D terminal x 1 (Compatible with DDC2B)
AUDIO IN A Audio input Pin jack terminal x 2 (L/R) 500 mV (rms), high impedance
AUDIO IN B Audio input Stereo mini jack terminal x 1 500 mV (rms), high impedance
REMOTE RS-232C input D-sub 9-pin terminal x 1 (For RS-232C control)
RS-485 input RJ-45 pin terminal x 1 (For RS485, MAKE, and TRIGGER control)
RS-485 output RJ-45 pin terminal x 1 (For RS485 and IR OUT control)
AUDIO OUT MONITOR OUT Pin jack terminal x 2 (L/R) Output impedance 600 Ω
EXT. SPEAKER Speaker output terminal (L/R) Impedance 6 Ω to 8 Ω
06-42_GM-H40L2A-f.indd 4106-42_GM-H40L2A-f.indd 41 06.4.24 5:21:28 PM06.4.24 5:21:28 PM