Filter
Top Products
31
Basic Operation
■ Basic Operations in the OHP Mode
NOTE
The projected image in the OHP display (projection of actual object) may be slightly distorted as a very wide-
angle lens is used.
1 Adjust the size of the projected image.
Rotate the zoom adjuster on the projection lens to adjust the
size of the projected image.
2 Adjust the focus.
Adjust the focus adjuster on the projection lens until the
projected image is sharp.
3 Compensate the keystone.
See “Compensating Keystone” on page 21.
4 Check the OHP’s initial screen.
When you select OHP, the “Set your document and press the refresh button” message appears and
the projected image becomes all white, and a window that shows how the document is moving
appears on the bottom right of the projected image.
Main Unit Operation
Remote Control Operation
2
5
3,6,7,8,9,10,
11,12,13,14,
15,16,18
1
KEYSTONE
KEYSTONE
Cha.05-1 04.7.29, 11:47 AM31