Filter
Top Products
46
◆ Setting 1
<Setting 1 Menu>
NOTE
In the “Setting 1” menu, the currently set input signals and lamp usage time can be displayed for confirmation.
◆ Setting 2
<Setting 2 Menu>
Menu Item
Auto power off
Start-up display
Economy mode
Setting Item
ON/OFF
ON/OFF
ON/OFF
Description
Sets the auto power off function ON/
OFF. When auto power off is set to
ON, the projector automatically
goes to standby mode if no signals
are input for a fixed period of time
(about 15 minutes).
Sets whether or not to display the
logo while the lamp is on.
Sets the lamp in Economy mode.
Menu Item
Pointer type
RGB-OUT
select
Mute mode
Description
Selects a type of pointer from
among the three types.
When PC·OHP is selected:
If the input selection is OHP, then
the image is output as an OHP
image for which the timing is
changed to (XGA 60Hz) on page 24.
If the input selection is personal
computer/video, then the personal
computer image is a straight
through output.
When OHP is selected:
No matter what input selection is
made, OHP images are output at
(XGA 60Hz) timing on page 24.
Sets the image to be displayed
when the projected image is muted.
When black is selected:
The entire projected image appears
black.
When wallpaper is selected:
An image stored image as wallpaper
is displayed. (See page 60 for
information on how to set
wallpaper.)
Setting Item
/ /
PC·OHP/
OHP
Black/
Wallpaper
Standard Return
Setting 1
Auto power off
ON / OFF
Start-up display
ON / OFF
Economy mode
ON / OFF
Lamp usage time
Input signal
24H
1024 x 768 / 48.6KHz 60H
Standard Return
Setting 2
Pointer type
RGB-OUT select
PC · OHP / OHP
Mute mode
Black / Wallpaper
Cha.05-2 04.7.29, 11:47 AM46