Kodak 3.2 All in One Printer User Manual


 
Printer Overview
8 www.kodak.com/go/aiosupport
Configuring printer settings
To set or change basic printer settings:
1. Press .
2. Press , then touch Printer Settings.
3. Touch the following settings:
Date and Time
–Touch Ye a r , Month, Day, Hour, or Minute to change the individual settings.
Touch when you are done.
NOTE: You can also synchronize the printer date and time to your computer using
Home Center Software.
Button Sounds
–Touch On or Off to set.
Ti m e to L ow Po we r
To conserve energy, your printer will enter a low power (sleep) mode after
being idle for a default delay time of 1 hour. You can increase the delay time to
low power. Increasing the delay time may result in reduced energy savings.
Touch the time to low power (select from 1 to 4 hours in 0.5 hour
increments). After the time to low power, the printer enters a low-power
(sleep) mode.
Tagged Images Printing (see Printing tagged pictures, page 57)
–Touch On or Off to set.
Language
Touch or to scroll through the languages, then touch a selection.
Country/Region
Touch or to scroll through the countries, then touch a selection.
Reset All Settings (see Resetting factory defaults, page 100)
NOTE: Resetting factory defaults does not change the date and time,
language, country/region, or network settings.
Printer Info
Touch to display the version of firmware currently running on the printer.
Press OK when you are done.
4. Press to return to the Home Screen.