Filter
Top Products
www.kodak.com/go/aiosupport 15
KODAK ESP 3.2 / 3.2s All-in-One Printers
Installing your printer on additional computers on the network
To add your printer to another computer(s) on your network, install the KODAK
All-in-One Printer Software on each computer.
1. Go to www.kodak.com/go/esp3_2downloads (for ESP 3.2 Printers) or
www.kodak.com/go/esp3_2sdownloads (for ESP 3.2s Printers).
2. In the search results, click the link for your operating system.
3. Follow the on-screen instructions.
Connecting to another KODAK All-in-One Printer
If you are connecting to a newer model printer (for example, you have a HERO 3.1
Printer and now you are adding an ESP 3.2 Printer), you must install the software for
the newer model.
NOTE: When you install the new software, the printer driver for the HERO 3.1
Printer will be uninstalled, and an upgraded driver for the HERO 3.1 Printer
will be installed in addition to the driver for the ESP 3.2 Printer.
On a computer with WINDOWS OS:
1. Select Start > All Programs > Kodak > Kodak Printer Setup Utility.
• If your wireless printer (example: KodakESP3.2+xxxx) is not listed:
a. Select No, my printer is not listed, then click Next.
b. From the drop-down list, select your printer, then click
Next.
c. Select Network - Wireless/Wi-Fi, then click Next.
When your printer is detected, driver installation begins.
• If your wireless printer (example: KodakESP3.2+xxxx) is listed:
a. Select the printer that is connected to your network, then click
Next.
b. Select Yes, my printer is listed, then click Next.
When your printer is detected, driver installation begins.
2. When driver installation is complete, click Done.
On a computer with MAC OS:
1. Select Apple > System Preferences.
2. Under Hardware, select Print & Fax or
Print & Scan.
3. Click + in the dialog box.
4. Select your printer from the list.
5. Click
Add, if required.