Filter
Top Products
Printer Options 2-9
Reference Guide
Supply Type
This setting allows you to select your supply options. The available options are sheet, roll,
roll2 or takeup. Select sheet if you intend to use cut sheet stock. Select roll if you are
going to use roll paper on the upper roll feeder. (No takeup available with this option.)
Select roll2 if you are going to use roll paper with the lower roll feeder. (No takeup
available with this option.) Select takeup if you intend to use roll paper with the optional
takeup system.
To choose supply type
1 Press Setup Menu/Paper Option Menu/Supply Type.
2 Choose the supply type.
3 Press OK.
Media standard
When you create an image, you determine its size at the computer. It's important that you
know the size of the image and load the appropriate size media because the printer
automatically defines the print area based on the loaded media's width. Be sure that the
media you load is wide enough to accommodate the image. If extra length is required, use
roll media. If the media is smaller than the image, the image may be truncated. Minimum
media width is 11".
To choose the media standard
1 Press Setup Menu/Paper Option Menu/Media Standard.
2 Choose the size of media you are loading.
3 Press OK.