Filter
Top Products
Getting Started
1–11
January 1998
SCSI Cable
Follow these steps to attach a SCSI cable:
NOTE: SCSI cabling can be used only on printers running in raster mode.
1. Make sure that the printer is turned off.
2. Turn the host computer off.
3. Plug in the SCSI cable and secure it to one of the printer’s SCSI ports.
SCSI ports
4. Install and secure the SCSI terminator on the open SCSI port or on
the last printer when daisy-chaining multiple printers.
NOTE: If you are connecting the printer to a Macintosh IIfx system, a
special Macintosh IIfx terminator is required. This terminator is
available from your Apple retailer.
5. Turn the printer on.