Filter
Top Products
Getting Started
1–24
January 1998
Turning on the Power
Press the “|” side of the power switch to turn on the printer. The switch is
located on the lower left side of the printer.
It may take up to one minute for the printer to initialize. During this time,
the power light will illuminate, and two messages will display alternately
on the display panel:
INITIALIZING*
INITIALIZING**
PLEASE WAIT
When the printer is ready a set of three messages will flash on the
display panel:
READY–raster
ribbon type
.
media type
will be replaced by the size and type of paper that is loaded
in the paper tray.
ribbon type
will be replaced by the type of ribbon that is loaded in the
printer. For example, “XTRALIFE COLOR”.
If the printer fails to initialize, the following message will appear on the
control panel:
INIT ERROR
If this message appears, turn the printer off and back on again. If the
message appears again, the printer requires service.