Filter
Top Products
Getting Started
1–28
January 1998
Buttons
The buttons on the display panel allow you to set the printing features of
the printer, cancel print jobs, override mismatches, and generate test
prints. Following are descriptions of each button.
Cancel
The Cancel button allows you to abort the job that is closest to completion.
For example, you may have a job printing and a job processing. If you
press the Cancel button, the job being printed is aborted immediately. No
additional pages in that job are printed, and the page that is currently
being printed is ejected. If you press the Cancel button again, the next
job will be cancelled, if one exists.
The Cancel button also scrolls down through the Setup menu when using
the Setup button. For more information, refer to the section entitled
“Printer Setup” in this chapter.
Setup/Select
The Setup/Select button allows you to enter the Setup mode to control
printer parameters. See the section entitled “Printer Setup” in this chapter
for more details.
Print
The Print button:
D Generates a test print when the printer is not processing other jobs
and READY appears in the LCD panel.
D Begins printing after mismatch errors are listed. For more
information, refer to the section “Mismatch Conditions” in
Chapter 4,
Correcting Problems.