Filter
Top Products
A-61003 September 1993FC-8
Function Code Name/
Code Description Additional Input
F31 Lead End Code • Enter the roll number, if different than the one
Allows you to create a lead displayed.
end code for retrieval • Press the Enter key.
purposes. • Enter the operator ID, if different than the one
displayed.
• Press the Enter key.
• Enter the next Image Address, if different than
the one displayed.
• Press the Enter key.
F32 Trail End Code none
Allows you to create a trail
end code for retrieval
purposes.
F33 Roll Number To enter a new roll number:
Allows you to display the • Enter a new roll number, up to nine (9) digits.
current roll number and/or • Press the Enter key.
change to a new roll number.
F34 Operator ID Number To enter a new operator ID:
Allows you to display the • Enter a new operator ID number, up to
current operator ID number three (3) digits.
and/or change to a new • Press the Enter key.
operator ID number.
F35 Cassette ID Number To enter a new cassette ID number:
Allows you to display the • Enter a new cassette ID number, up to
current cassette ID number two (2) digits.
and/or change to a new • Press the Enter key.
cassette ID number.
F37 Scanner Calibration • Feed calibration target.
Allows you to initiate the
calibration process required
before scanning documents.
F38 Scanner End-of-Job none
Allows you to signal the host
computer that the last
document of the job has been
fed into the transport.