Filter
Top Products
A-61003 September 1993
FB-3
6. Open a new box of microfilm and remove the spool of film.
NOTE: Save the empty box to store the exposed film
prior to processing and for storing the film
following processing.
7. Peel off the paper band from around the spool.
8. Unwind approximately 18 inches (46 cm) of film.
9. Lift the light guard and place the spool of film on the supply
spindle, with the number 1 side up.
10. Slowly rotate the spool until the two round holes on the
spool engage the lugs on the spindle.
11. Lower the light guard.