Filter
Top Products
A-61003 September 1993FB-8
11. Lift the take-up spool out of the cassette.
12. Place the spool into the film box. Allow approximately
2 to 3 inches (5 to 8 cm) of the film to protrude from under
the lid of the box. Close the top of the box securely.
13. Write identification data (i.e., subject,. title, date, job
number, etc.) on the film box label. The film is now ready
for processing.
To continue filming using the unexposed portion of the roll of
film:
14. Obtain an empty take-up spool.
15. Unwind approximately 18 inches (46 cm) of film.
16. Fold back approximately 1/2 inch (1 cm) at the end of the
film.
17. Pick up the take-up spool and hold it with the number 1
side up.
18. Insert the folded end of the film into the slot in the take-up
spool core.
19. Rotate the spool counterclockwise to secure the film on the
spool.
20. Place the take-up spool over the take-up spindle lugs.
21. Slide the release lever toward the battery compartment and
hold it in this position.
22. Slowly rotate the take-up spool counterclockwise three full
turns to secure the film on the spool. Allow the release
lever to return to its normal position.
23. Replace the top cover on the cassette. Press down on the
cover latch and turn it clockwise to lock the cover in place.
NOTE: The cassette may now be inserted into the machine
and filming may continue.