Filter
Top Products
A-61003 September 1993FB-6
A film cassette can be loaded into either the upper or lower film
slot.
1. Open the cassette access door.
2. Swing the drive release lever (green handle) out.
3. Insert film cassette(s).
NOTE: Refer to the label on the inside of the cassette access
door for cassette orientation. The display on the film
cassette is oriented differently depending upon the film
slot being used.
4. Swing the drive release lever back into place.
5. Close the cassette access door.
Whenever a fresh or partial roll of film is loaded into the
machine, a leader is automatically made when the cassette
access door is closed and the side panel switch has been
turned on.
A Please Wait... message will appear in the Status Display
while the film leader is being advanced. Once a normal
operating display appears, indicating that the leader has been
advanced, check the film supply indicators on the control panel
to determine if you have enough film to complete the job.
LOADING
CASSETTE(S) INTO
THE MACHINE