Filter
Top Products
A-61003 September 1993OM-6
Code Operator Message Displayed Description/Action Required
E216 Sorter failed to move to hopper The Sorter was not able to or did not
access the specified or proper bin.
Press the Jog key. Press the Run key.
Try again.
E217 Sort bin conflict Sorting criteria and slected bin do not
correspond. Use Function Code F81 or
F82 to select another bin. Try again.
E219 Clear error and refeed last doc Press the Clear key. Press the Run key
and refeed the last document.
E220 Check for jam in entrance transp Clear the document path.
Press the Clear key. Press the Jog key.
Press the Run key and refeed
document(s).
E221 Clean entrance sensor Perform maintenance/cleaning
procedures.
E225 Check for jam in transport Clear the document path.
Press the Clear key. Press the Jog key.
Press the Run key and refeed
document(s).
E226 Clean slide-out sensor reflector Perform maintenance/cleaning
procedures.
E227 Check for jam in transport Clear the document path.
Press the Clear key. Press the Jog key.
Press the Run key and refeed
document(s).
E228 Check for jam in upper transport Clear the document path.
Press the Clear key. Press the Jog key.
Press the Run key and refeed
document(s).
E229 Clean exit sensor Perform maintenance/cleaning
procedures.
E230 Open access door to correct error Open the access door.
Verify that all operator accessible areas
are properly closed.
Press the Run key to continue.