Filter
Top Products
A-61512 May 2006 7
Installing the scanner Install the scanner in the following order:
1. Assemble the scanner
2. Install the Kodak Driver Software
3. Verify that you have a USB port
4. Connect the power cord to the scanner
5. Connect the USB cable between your scanner and PC
6. Turn on scanner power and finalize the Kodak Driver Software
installation
7. Install other supplied applications (optional)
IMPORTANT:
• Install the Kodak Driver Software on the host PC before you
connect the scanner.
• Some operating systems will only support USB 2.0, and others
only support USB 1.1. For best performance, use USB 2.0 when
possible.
Assembling the scanner The input and output trays snap into place. They may also be adjusted
to fit different document sizes.
Attaching the input tray
1. Locate the input tray slots on the scanner.
2. Align the input tray pins with the slots.
3. Push down on the input tray until it snaps into place.