Filter
Top Products
56 A-61512 May 2006
• Aggressive: selecting this option will eliminate any residual black
border on any image edges. In order to achieve this, there is a
possibility that a small amount of image data from the edge of the
document may be lost
• Fixed to Transport: (used for batches of same-sized documents)
allows you to define the area or zone to be imaged. Fixed to
Transport cropping is used in conjunction with paper size and page
layout and assumes you are center-feeding your documents. If you
are not using center feeding, you must select the Area button to
define your scan area. See the section entitled “Defining the Scan
area” later in this chapter.
• Relative to Document: (zone processing): (used for batches of
same-sized documents) — zone processing is a floating fixed crop
window (the zone) located relative to the upper left corner of a
document. It allows you to select an area on the document to be
delivered in either color/grayscale or binary format (a separate
window for both binary and color/grayscale may be defined). Different
parameters may be selected for both the front and rear of the image.
This option may be used in conjunction with Automatic cropping
where a separate color/grayscale or binary area to be saved is
desired. It is useful in applications where a photograph, signature,
embossment or seal appears in a consistent area for an application
(you may want that small area in color/grayscale and the rest in
binary).
To define a zone, select Area to display the Scan Area dialog b box.
See the section entitled, “Defining the Scan area” later in this chapter
for more information.
NOTE: You can scan documents longer than 35.56 cm (14 in.) and less
than 86.36 cm (34 in.) when the host PC is configured with
adequate memory (see “System requirements” for more
information).
Page size and layout The default paper size is set when a scanner is first selected. You can
choose a different paper size using the drop-down list box.
NOTE: The Page Size and Page Layout selections also appear on the
Scan Area dialog box. If you make a change on the Scanner
Settings dialog box, the same selections will appear on the
Scan Area dialog box and vice versa.
The Page Layout area allows you to select either Portrait or Landscape.
• Portrait will display the image orientation in the shape of a
conventional portrait, where height is greater than width.
• Landscape will display the image orientation in the shape of a
conventional landscape painting, where width is greater than height.