Filter
Top Products
A-61512 May 2006 59
More Scanner
Settings dialog box
Additional image processing values unique to the i30/i40 Scanners are
available when you choose the More button on the Scanner Settings
dialog box.
Camera settings area
The selections in the Camera area list the available sides (front and
back) of an image where you can define individual image processing
values.
When starting the configuration process, use the steps below as a
guide:
1. Check the images you wish to capture (Enable camera settings).
2. Select the order to transfer the images (Color First/Binary First).
3. Configure each image by highlighting it (Configure).
Enable camera settings select the desired checkbox to enable the
Front Color, Front Binary, Back Color or Back Binary settings as
desired. This indicates the images you wish to capture and transfer to
the host PC. (It is possible to capture only rear images.) You can enable
your selection by putting a checkmark in the desired box.
Color First/Binary First define the transfer order by selecting the
Color First or Binary First radio button. This determines which image
is transferred to the host PC first when using simultaneous output
scanning. For example, if you are scanning front color and front binary
and you select Binary First the scanner will return the front binary
image, then the front color image.
Configure highlight the image you want to setup. As you select the
image, other options will become available on the More Scanner
Settings dialog box. The availability of these options is dependent upon
the selection you make.