Filter
Top Products
A-61527 May 2006 21
3 Using the Scanner
Turning the scanner
on and off
• Press the power switch on the back of the scanner to turn the
scanner on (I) or off (O).
When you turn on the scanner, it will go through a series of self-tests.
When completed, the green indicator light will remain on and constant.
Adjusting the input
tray
Documents are placed into the input tray to be scanned through the
automatic document feeder.
To adjust the input tray:
1. Lift the input tray to about a 45° angle.
2. Pull the input tray wire leg down.
3. Place the wire leg on the top of the clips on the flatbed cover.
4. Press down slightly on the input tray to snap the wire leg into the
clips.