Filter
Top Products
A-61527 May 2006 53
Using the ISIS Driver The ISIS Driver is a piece of software that communicates with the
scanner. This driver is created and maintained by Pixel Translations,
Inc. and is provided with the scanner by Kodak. Many scanning
applications support ISIS drivers and this driver can be used to
interface with them.
This section provides descriptions of the options on the ISIS dialog
boxes and how to set these options.
For the purpose of this manual, all displayed dialog boxes assume the
features available on the Kodak i65 Scanner. If you have a Kodak i55
Scanner all options are limited to simplex scanning only.
Scanner Settings dialog
box
See the section entitled, “Starting the Scan Validation Tool” earlier in
this chapter to access the Scanner Settings dialog box.
Buttons on the Scanner
Settings dialog box
Following are descriptions of the buttons located at the bottom of the
dialog box.
More displays the More Scanner Settings dialog box. This dialog
box provides additional image processing settings unique to the Kodak
i55/i65 Scanners.
Area displays the Scan Area dialog box.
Copy this function is only available when using the scanner in
duplex mode. The Copy button provides a convenient way to set up the
color, grayscale or binary image settings on one side and transfer them
to the other. For example, if you highlight and set up Front Binary, you
can use the Copy button to duplicate those settings for Rear Binary.
About displays the About dialog box. The About dialog box provides
detailed information such as the driver version number, certification
status and the version of QuickDriver used to develop this driver.