Filter
Top Products
24 A-61527 May 2006
Document
preparation
• A batch of documents to be fed into the scanner must be arranged so
the leading edges of all documents are aligned and centered in the
input tray; this allows the feeder to introduce documents into the
scanner one at a time.
• Staples and paper clips on documents may damage the scanner and
documents. Remove all staples and paper clips before scanning.
• Documents should be in good condition.
Paper Weights: 60 g/m
2
to 105 g/m
2
(16 to 28 lbs.)
Minimum Document Size: 9.4 x 14 cm (3.7 x 5.5 in.)
Maximum Document Size:
• Automatic Document Feeder — 21.6 x 86 cm (8.5 x 34 in.)
NOTE: Long Paper mode will scan document lengths from 35.56 cm
(14 in.) to 86.36 cm (34 in.) when the host PC is configured
with adequate memory (see “System requirements” for more
information regarding memory requirements). See Chapter 4,
Image Processing for more information regarding Long Paper
mode.
• Flatbed — 21.6 x 29.7 cm (8.5 x 11.69 in.)
Paper Types: Bond, Laser, Inkjet, Offset
NOTE: Chemically coated papers may cause excessive wear/swelling
of the rollers.
Paper inks: All inks on the paper must be dry before scanning is
started. This includes: Standard offset printing, Inkjet printer, Thermal
transfer, Handwriting inks.
Correction Fluids: Liquid Paper®, Tipp-Ex®, Wite-out®, and other
similar correction fluids.